Quick Links
To kill a Linux process you need its ID or its name. If all you know is the port it's using, can you still kill it? Yes, in several different ways.
Killing Processes
Occasionally a Linux process can become unresponsive. It may stop operating correctly, or it might continue to work but ignore requests for it to shut down, or start gobbling memory, CPU, or network bandwidth.
Whatever your motives, there are ways to kill a process from the Linux command line. The classic method is to use the kill command with the process ID of the process you want to terminate. The kill command has some close relatives. The
pkill command will kill a process by name, and
killall will kill all processes it can find that share part of a name.
If all you know about a process is it is using a port on your computer, there are still ways to identify and kill it. In networking terms, "port" can mean a physical connection into which you insert a cable with a plug on the end, such as a CAT5 or 6 network lead, or it can mean a software port.
A software port is the final part of a network connection. The IP address of a device identifies the computer or other network appliance. The applications inside the computer use different ports. These provide another level of granularity. The network traffic has arrived at the correct computer using the IP address, and by using port addressing it can be delivered to the correct application.
It's like postal mail arriving at a hotel, then being sorted and delivered to the appropriate rooms. The IP address is like the street address of the hotel, and the room numbers are like the port numbers.
If you see network activity on a port and you don't recognize the process that is generating it, or its behavior is problematic or suspicious, you might want want to kill the process. Even if all you know is the port number, you can track down the process and kill it.
Creating Connections With socat
So that we have some connections to kill, we'll use socat to create network connections using different protocols. You'll need to install socat . To install it on Ubuntu, use this command:
sudo apt install socat
On Fedora use dnf:
sudo dnf install socat
On Manjaro you need to type:
sudo pacman -S socat
The syntax for socat is straightforward if a little long-winded. We need to provide the source and destination addresses. For each of these, we need to provide the protocol, IP address, and port number. We can substitute STDIN or STDOUT as a source or destination.
This command creates a connection between a TCP listening socket on port 7889, on the loopback IP address of 127.0.0.1, and STDOUT. The ampersand "&" runs the command in the background, so that we retain access to the command line.
socat tcp-listen:7889,bind=127.0.0.1 stdout &
We'll create two more connections so that we have a small selection of sockets using different protocols. We'll create a UDP connection and an SCTP connection. The only part of the command that changes is the protocol.
socat udp-listen:7889,bind=127.0.0.1 stdout &
socat sctp-listen:9999,bind=127.0.0.1 stdout &
Using Kill
Of course, we can use kill to terminate the process, just as long as we know what the ID of the process is. To find the PID, we can use the lsof command.
To list the details of the process on port 7889 that are using the TCP protocol, we use the -i (internet address) option, like this.
lsof -i tcp:7889
The PID of this process is 3141, and we can go ahead and use that with kill:
sudo kill 3141
We can save ourselves some effort if we use pipes. If we pipe the output of lsof into awk and tell awk to search for lines that contain the port we're interested in---7889---and print the second field from that line, we'll isolate the PID.
lsof -i tcp:7889 | awk '/7889/{print $2}'
We can then pipe the output from awk into the kill command using xargs. The xargs command takes its piped input and passes it to another command as command line parameters. We'll use xargs with the kill command.
lsof -i tcp:7889 | awk '/7889/{print $2}' | xargs kill
We don't get any visual feedback. In the typical Linux way, no news is good news. If you want to check that the process has been terminated you can use lsof once more.
lsof -i tcp:7889
Because lsof doesn't report anything, we know there's no such connection.
We can remove a process using the UDP protocol simply by replacing "tcp" with "udp" in our earlier command.
lsof -i udp:7889 | awk '/7889/{print $2}' | xargs kill
However, lsof doesn't recognize the SCTP protocol.
lsof -i sctp:7889
We can use the ss command to do that. We're using the -S (SCTP) option to search for SCTP sockets, the -a (all) option to search for all types of sockets (listening, accepting, connected, etc.), and the -p (processes) option to list the details of the process using the socket.
ss -Sap
We can parse that output using grep and awk . We could also parse it using grep and some PERL regexes, but this way is much easier to understand. If you were going to use this more than once or twice you'd probably make an alias or shell function out of it.
We'll pipe the output from ss into grep and search for our port number, 7889. We'll pipe the output from grep into awk. In awk, we're using the -F (separator string) option to set a comma "," as the field delimiter. We search for a string containing "pid=", and print the second comma-delimited field from that string.
ss -Sap | grep "7889" | awk -F',' '/pid=/{print $2}' 
That has given us the string "pid=2859."
We can pipe that into awk again, set the field delimiter to the equals sign "=" and print the second field from that string, which will be the text behind the equals sign.
ss -Sap | grep "7889" | awk -F',' '/pid=/{print $2}' | awk -F'=' '{print $2}'
We've now isolated the process ID. We can use xargs to pass the PID to kill as a command line parameter.
ss -Sap | grep "7889" | awk -F',' '/pid=/{print $2}' | awk -F'=' '{print $2}' | xargs kill 
That kills the process that was using the SCTP protocol socket on port 7889.
The fuser Command
The fuser command simplifies things a great deal. The downside is, that it only works with TCP and UDP sockets. On the plus side, those are the two most common types of sockets you'll need to deal with. The fuser command was already installed on the Ubuntu, Fedora, and Manjaro computers we checked.
All you need to do is use the -k (kill) option, and provide the port and protocol. You can either use the -n (namespace) option and provide the protocol and port, or use the "forward slash shortcut format" and put the port number first.
fuser -n tcp 7889
fuser 7889/udp
The port number, protocol, and PID of the terminated process are printed in the terminal window.
Try fuser First
It'll probably be installed on the computer you're working on, and the protocol is likely to be TCP or UDP, so there's a great chance the simplest way will work for you.
ncG1vNJzZmivp6x7qbvWraagnZWge6S7zGhvbGhoboFwtM6wZK2nXaC2rbiMmmSloZ6qxW680aianqujYq%2B6ec%2Boqa1lnqq6o7HRaA%3D%3D